How to Drive a Walkie Forklift

Walkie forklifts, otherwise called “walkie riders,” are forklift machines that permit the operator to either stroll behind or ride on the forklift while operating it. The walkie rider does not have enlarging forks or forks that ascent up more than 6 inches or something like that. Its fundamental method is to transport pallets of material from one place to an alternate one. They might be challenging to control for a novice, however following moving toward getting used to the controlling controls, walkie riders are basic to operate.



  1. Bring down the forks as far down as they will try for greatest security when there is no burden.
  2. Handle the holds of the controlling arm so the speed control could be gained entrance to by either thumb in walkie mode. In riding mode, keep both feet on the platform. Place one hand on the directing arm and the other on the snatch handle.
  3. Bring down the guiding arm to captivate the electrical circuits and begin the walkie rider. This withdraws the mechanical brake.
  4. Move forward by pressing the speed control button in the forward position. Pressing the button harder will speed up the walkie rider.
  5. Discharge the speed control to make the walkie rider stop. Permit the guiding arm to come back to the upright position. The controlling arm can likewise be pushed down until it is level. Possibly system will captivate the mechanical brake.
  6. Bring down the controlling arm and sluggishly press the reverse button on the speed controls. Press the control harder to expand reverse speed.

Lift Operation

  1. Raise the forks by pressing the lift prod button.
  2. Discharge the lift prod button to stop the forks once they are at the sought tallness.
  3. Press the more level prod button to bring down the forks. Keep the button until the forks are completely brought down.